CS501 Advance Computer Architecture
Quiz No.3 JAN 10,2013
_________ is a technique in which some of the CPU's address lines forming an input to the address decoder are ignored.
Microprogramming
Instruction pre-fetching
Pipelining
Partial Decoding
An Interface that can be used to connect the microcomputer bus to ______________ is called an I/O port
Flip flops
Memory
Peripherals devices
Multiplexes
Connection to a CPU that provides a data path between the CPU and external devices, such as a keyboard, display, or reader is called-----------
Buffer
I/O port
Memory mapping
Processor
In which one of the following methods for resolving the priority, the device with the highest priority is placed in the first position, followed by lower-priority devices up to the device with the lowest priority which is placed last in the series?
Asynchronous
Daisy-Chaining Priority
Parallel
Semi-synchronous
Identify the type of serial communication error condition in which A 0 is received instead of a stop bit (which is always a 1)?
Framing error
Parity error
Overrun error
Under-run error
Where does the processor store the address of the first instruction of the ISR?
Interrupt vector
Interrupt request
Interrupt handler
All of the given Options
Identify the following type of serial communication error condition: "The prior character that was received was not still read by the CPU and is over written by a new received character."
Framing error
Parity error
Overrun error
Under-Run error
In ____________ a separate address space of the CPU is reserved for I/O operations
Isolated I/O
Memory Mapped I/O
All of the above
None of above
Every time you press a key, an interrupts is generated. This is an example of
Hardware Interrupt
Software Interrupt
All of the given
None of the given
_________ is an electrical pathway through which the processor communication with the internal and external devices attached to the computer.
Computer Bus
Hazard
Memory
Disk
Where does the processor store the address of the first instruction of the ISR?
Select correct option:
Interrupt vector
Interrupt request
Interrupt handler
All of the given options
In ________, a separate address space of the CPU is reserved for I/O operations.
Select correct option:
Isolated I/O
Memory Mapped I/O
All of above
None of above
-------------- is the time needed by the CPU to recognize (not service) an interrupt request.
Select correct option:
Interrupt Latency
Response Deadline
Timer delay
Throughput
Question # 4
_________ is a technique in which some of the CPU's address lines forming an input to the address decoder are ignored.
Select correct option:
Microprogramming
Instruction pre-fetching
Pipelining
Partial decoding
Question # 5
How can you define an interrupt?
Select correct option:
A process where an external device can speedup the working of the microprocessor
A process where memory can speed up programs execution speed
A process where an external device can get the attention of the microprocessor
A process where input devices can takeover the working of the microprocessor
Question # 6
An interface that can be used to connect the microcomputer bus to ________is called an I/O Port.
Select correct option:
Flip Flops
Memory
Peripheral devices
Multiplexers
Question # 7
Every time you press a key, an interrupt is generated. This is an example of
Select correct option:
Hardware interrupt
Software interrupt
All of the given
None of the given
Question # 8
Identify the following type of serial communication error condition: "The prior character that was received was not still read by the CPU and is over written by a new received character."
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Question # 9
A software routine performed when an interrupt is received by the computer is called as ---------
Select correct option:
Interrupt
Interrupt handler
Exception
Trap
Which one of the following methods for resolving the priority makes use of individual bits of a priority encoder?
Select correct option:
Daisy-Chaining Priority
Asynchronous Priority
Parallel Priority
Semi-synchronous Priority
In which one of the following methods for resolving the priority, the device with the highest priority is placed in the first position, followed by lower-priority devices up to the device with the lowest priority, which is placed last in the series?
Select correct option:
Asynchronous
Daisy-Chaining Priority
Parallel
Semi-synchronous
In ________, a separate address space of the CPU is reserved for I/O operations.
Select correct option:
Isolated I/O
Memory Mapped I/O
All of above
None of above
Identify the following type of serial communication error condition: "The prior character that was received was not still read by the CPU and is over written by a new received character."
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Identify the following type of serial communication error condition in which no character is available at the beginning of an interval.
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Which one of the following methods for resolving the priority makes use of individual bits of a priority encoder?
Select correct option:
Daisy-Chaining Priority
Asynchronous Priority
Parallel Priority
Semi-synchronous Priority
A software routine performed when an interrupt is received by the computer is called as ---------
Select correct option:
Interrupt
Interrupt handler
Exception
Trap
_________ is a technique in which some of the CPU's address lines forming an input to the address decoder are ignored.
Select correct option:
Microprogramming
Instruction pre-fetching
Pipelining
Partial decoding
Identify the type of serial communication error condition in which A 0 is received instead of a stop bit (which is always a 1)?
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Where does the processor store the address of the first instruction of the ISR?
Select correct option:
Interrupt vector
Interrupt request
Interrupt handler
All of the given options
Which one of the following is NOT a technique used when the CPU wants to exchange data with a peripheral device?
Select correct option:
Direct Memory Access (DMA)
Interrupt driven I/O
Programmed I/O
Virtual Memory
A software routine performed when an interrupt is received by the computer is called as ---------
InterruptC
Interrupt handler
Exception
Trap
Which one of the following methods for resolving the priority makes use of individual bits of a priority encoder?
Daisy-Chaining Priority
Asynchronous Priority
Parallel Priority
Semi-synchronous Priority
-------------- is the time needed by the CPU to recognize (not service) an interrupt request.
Interrupt Latency
Response Deadline
Timer delay
Throughput
______ is an electrical pathway through which the processor communicates with the internal and external devices attached to the computer.
Computer Bus
Hazard
Memory
Disk
Ist woh jiss ney tumhari jeet ke Liye buhat kuch hara hoo
To post to this group, send email to vuhelp_pk@googlegroups.com
To unsubscribe from this group, send email to vuhelp_pk+unsubscribe@googlegroups.com
Group Rules Vuhelp4u
Sharing of Video songs links, movies links, dramas links are not allowed in study group. Only Islamic and general information Video links allowed.
SPAM, Advertisement, and Adult messages are NOT allowed and that member will be behaved strictly.
http://groups.google.com/group/vuhelp_pk?hl=en_US
No comments:
Post a Comment