CS401- Computer Architecture and Assembly Language
Quiz No.2 JAN 10, 2013
Question # 1 of 10 ( Start time: 02:24:57 PM ) Total Marks: 1
Memory address space is selected when which of the following instructions is given to the processor?s
Select correct option:
MOV
DEC
IN
ADD
PCB stands for?
Select correct option:
Process Control Block
Process Clearing Block
Programable Counter Block
Programs Control Block
Question # 3 of 10 ( Start time: 02:26:41 PM ) Total Marks: 1
Creation of threads can be
Select correct option:
Static
Dynamic
Both
None
Threads can have function calls, parameters and ________ variables.
Select correct option:
global
local
legal
illegal
Which of the following is the highest priority interrupt
Int3
Int2
Int1
Int0
The input frequency of the programmable interval timer (PIT) is
Fixed
Depends on processor clock
Variable
Depends on hardware attached
Programmable interrupt controller has two ports 20 and 21. Port 20 is the control port while port 21 is...........
The Interrupt mask register
Interrupt port
Output port
Input port
The source registers in OUT is ?
AL or AX
BL or BX
CL or CX
DL or DX
The time interval between two timer ticks is ?
40ms
45ms
50ms
55ms
Which of the following interrupts is used for saving and restoring the registers
INT6
Int7
Int8
Int0
In programmable interrupt controller which of the following ports is referred as a interrupt mask register?
19
20
21
22
Refernce:- page no 115
Port 21 is the interrupt mask register which can be used
for selectively enabling or disabling interrupts
The thread registration code initializes the PCB and adds it to the linked list so that the __________ will give it a turn.
Assembler
Scheduler
Linker
Debugger
The programmable interval timer (PIT) has input frequency of
1.193MHZ
2.192MHZ
3.196MHZ
4.198MHZ
Peripheral address space is selected when which of the following instructions is given to the processor?
MOv
In
Add
Out
Direction flag, the interrupt flag, and the trap flag are
used for mathematical operations
not used for mathematical operations
status flags
not status flags
An End of Interrupt (EOI) signal is sent by
Handler
Processor
IRQ
PIC
The space where all the registers of a task are stored is called the
control block
process control block
stack
memory
The number of pins in a parallel port connector are?
Select correct option:
20
25
30
35
Which of the following interrupt is of highest priority interrupt?
Select correct
Key board interrupt
Timer interrupt
INT 2
INT 3
The instruction used to read a character from the keyboard port is
in al, 0x60
out al, 0x60
in al, 0x80
out al, 0x80
Each thread can have their own
execution area
stack
memory
array
All the registers & stack are saved in
Multitasking
multi-processing
function call
BIOS
Which of the following IRQs is used for sound card or network card?
IRQ 4
IRQ 5
IRQ 6
IRQ 7
In programmable interrupt controller which of the following ports is referred as a control port?
22
19
21
20
In programmable interrupt controller which of the following ports is used for selectively enabling or disabling interrupts ?
19
20
21
22
Which of the following is the highest priority interrupt
Int3
Int2
Int1
Int0
The input frequency of the programmable interval timer (PIT) is
Fixed
Depends on processor clock
Variable
Depends on hardware attached
Programmable interrupt controller has two ports 20 and 21. Port 20 is the control port while port 21 is...........
The Interrupt mask register
Interrupt port
Output port
Inpuit port
The source registers in OUT is ?
AL or AX
BL or BX
CL or CX
DL or DX
Creation of threads can be
Static
Dynamic
Both
None
The time interval between two timer ticks is ?
40ms
45ms
50ms
55ms
Which of the following interrupts is used for saving and restoring the registers
INT6
Int7
Int8
Int0
PCB stands for?
Process Control Block
Process Clearing Block
Programable Counter Block
Programs Control Block
In programmable interrupt controller which of the following ports is referred as a interrupt mask register?
19
20
21
22
The thread registration code initializes the PCB and adds it to the linked list so that the __________ will give it a turn.
Assembler
Scheduler
Linker
Debugger
The programmable interval timer (PIT) has input frequency of
1.193MHZ
2.193MHZ
3.193MHZ
4.193MHZ
Threads can have function calls, parameters and __________ variables.
Global
Local
Legal
Illegal
Peripheral address space is selected when which of the following instructions is given to the processor?
MOv
In
Add
Out
Direction flag, the interrupt flag, and the trap flag are
used for mathematical operations
not used for mathematical operations
status flags
not status flags
An End of Interrupt (EOI) signal is sent by
Handler
Processor
IRQ
PIC
The space where all the registers of a task are stored is called the
control block
process control block
stack
memory
The instruction used to read a character from the keyboard port is
in al, 0x60
out al, 0x60
in al, 0x80
out al, 0x80
Which of the following pins of a parallel port connector are grounded?
25-32
10-18
18-25
32-39
Each thread can have their own
execution area
stack
memory
array
All the registers & stack are saved in
Multitasking (page 139)
multi-processing
function call
BIOS
Question # 1 of 10 ( Start time: 02:58:14 PM ) Total Marks: 1
The instruction used to read a character from the keyboard port is
Select correct option:
in al, 0x60
out al, 0x60
in al, 0x80
out al, 0x80
Question # 2 of 10 ( Start time: 02:59:00 PM ) Total Marks: 1
Each thread can have their own
Select correct option:
execution area
stack
memory
array
Question # 3 of 10 ( Start time: 03:00:28 PM ) Total Marks: 1
There is no instruction to clear the
Select correct option:
Trap flag
Interrupt flag
Direction flag
None of the above
Question # 4 of 10 ( Start time: 03:01:36 PM ) Total Marks: 1
PCB stands for?
Select correct option:
Process Control Block
Process Clearing Block
Programable Counter Block
Programs Control Block
From the following which is related to read a char from key board?
Select correct option:
out al, 0x60
in al, 0x60
out dx, al
ou dx, 0x378
The input frequency of the programmable interval timer (PIT) is
Select correct option:
Fixed
Depends on processor clock
Variable
Depends on hardware attached
The thread registration code initializes the PCB and adds it to the linked list so that the __________ will give it a turn.
Select correct option:
Assembler
Scheduler
Linker
Debugger
Question # 8 of 10 ( Start time: 03:02:37 PM ) Total Marks: 1
The source registers in OUT is ?
Select correct option:
AL or AX
BL or BX
CL or CX
DL or DX
Question # 9 of 10 ( Start time: 03:03:11 PM ) Total Marks: 1
The time interval between two timer ticks is ?
Select correct option:
40ms
45ms
50ms
55ms
Creation of threads can be
Select correct option:
Static
Dynamic
Both
None
Memory address space is selected when which of the following instructions is given to the processor?s
Select correct option:
MOV
DEC
IN
ADD
Question # 2 of 10 ( Start time: 02:25:56 PM ) Total Marks: 1
PCB stands for?
Select correct option:
Process Control Block
Process Clearing Block
Programable Counter Block
Programs Control Block
Question # 3 of 10 ( Start time: 02:26:41 PM ) Total Marks: 1
Creation of threads can be
Select correct option:
Static
Dynamic
Both
None
Question # 4 of 10 ( Start time: 02:27:46 PM ) Total Marks: 1
Threads can have function calls, parameters and ________ variables.
Select correct option:
global
local
legal
illegal
Which of the following is the highest priority interrupt
Int3
Int2
Int1
Int0
The input frequency of the programmable interval timer (PIT) is
Fixed
Depends on processor clock
Variable
Depends on hardware attached
Programmable interrupt controller has two ports 20 and 21. Port 20 is the control port while port 21 is...........
The Interrupt mask register
Interrupt port
Output port
Input port
The source registers in OUT is ?
AL or AX
BL or BX
CL or CX
DL or DX
The time interval between two timer ticks is ?
40ms
45ms
50ms
55ms
Which of the following interrupts is used for saving and restoring the registers
INT6
Int7
Int8
Int0
In programmable interrupt controller which of the following ports is referred as a interrupt mask register?
19
20
21
22
The thread registration code initializes the PCB and adds it to the linked list so that the __________ will give it a turn.
Assembler
Scheduler
Linker
Debugger
The programmable interval timer (PIT) has input frequency of
1.193MHZ
2.192MHZ
3.196MHZ
4.198MHZ
Peripheral address space is selected when which of the following instructions is given to the processor?
MOv
IN
Add
Out
Direction flag, the interrupt flag, and the trap flag are
used for mathematical operations
not used for mathematical operations
status flags
not status flags
An End of Interrupt (EOI) signal is sent by
Handler
Processor
IRQ
PIC
The space where all the registers of a task are stored is called the
control block
process control block
stack
memory
Question # 3 of 10 ( Start time: 12:20:27 AM ) Total Marks: 1
The number of pins in a parallel port connector are?
Select correct option:
20
25
30
35
Which of the following interrupt is of highest priority interrupt?
Select correct
option:
Key board interrupt
Timer interrupt
INT 2
INT 3
The instruction used to read a character from the keyboard port is
in al, 0x60
out al, 0x60
in al, 0x80
out al, 0x80
Each thread can have their own
execution area
stack
memory
array
Refernce:-
All the registers & stack are saved in
Multitasking
multi-processing
function call
BIOS
Which of the following is the highest priority interrupt
Select correct option:
INT3
INT2
INT1
INT0
Which of the following interrupts is used for saving and restoring the registers
Select correct option:
INT6
INT7
INT8
INT0
There is no instruction to clear the
Select correct option:
Trap flag
Interrupt flag
Direction flag
None of the above
For the external hardware to generate an interrupt there are how many pins out side the processor?
1
2
3
4
Which of the following IRQs is derived by a keyboard?
IRQ 0
IRQ 1
IRQ 2
IRQ 3
Which of the following IRQs is connected to serial port COM 2?
Select correct option:
IRQ 0
IRQ 1
IRQ2
IRQ3
Programmable interrupt controller (PIC) has
Select correct option:
One input signals and eight output signals
One input signal and one output signal not sure
Eight input signals and one output signals
Eight input signals and eight output signals
Which of the following IRQs is used by the parallel port?
IRQ 5
IRQ 4
IRQ 6
IRQ 7
Which of the following IRQs is a cascading interrupt?
IRQ 0
IRQ 1
IRQ 2
IRQ 3
Which of the following pins of a parallel port connector are grounded
10-15
18-25
25-32
32-39
Which of the following IRQs is used for Floppy disk derive?
IRQ 4
IRQ 5
IRQ 6
IRQ 7
When two devices in the system want to use the same IRQ line then what will happen?
A) An IRQ Collision
B) An IRQ Conflict
C) An IRQ Crash
D) An IRQ Blockage
The parallel port connector is called ?
Select correct option:
DB-25
BD-25
DB-24
BD-24
IRQ is referred to
Select correct option:
Eight input signals
One output signal
Eight output signals
One input signals
Ist woh jiss ney tumhari jeet ke Liye buhat kuch hara hoo
To post to this group, send email to vuhelp_pk@googlegroups.com
To unsubscribe from this group, send email to vuhelp_pk+unsubscribe@googlegroups.com
Group Rules Vuhelp4u
Sharing of Video songs links, movies links, dramas links are not allowed in study group. Only Islamic and general information Video links allowed.
SPAM, Advertisement, and Adult messages are NOT allowed and that member will be behaved strictly.
http://groups.google.com/group/vuhelp_pk?hl=en_US
No comments:
Post a Comment